Roof anchor posts and anchor points

Ensure safe movement and work on roofs with reliable, PITO™ roof anchor points that are integrated into the roof structure!

Roof anchor posts designed for demanding nordic conditions are suitable for various roof structures and roof materials. Versatile PITO™ roof anchor posts and anchor points can be used for personal fall protection, both as individual anchor points and as part of the PITO™ Greenline lifeline system. Together with the PITO™ Greenline lifeline system, you can build fall protection system for the entire roof, which enables safe and easy working conditions for professionals. In addition to the personal fall protection equipment standard EN 795, our strongest roof anchor posts meet the requirements of the SFS EN 1808 standard for suspended access equipments.

We help you design site-specific, correctly dimensioned fall protection solutions for up to four simultaneous users!

PITO™ roof anchor post

Roof anchor post to be installed to a reinforced concrete slab, hollow-core slab or TT slab with bolts or wedge anchors. Suitable for personal fall protection for four simultaneous users and for supporting suspended scaffolding.

Height 300 - 2000 mm

PITO™ cast-in anchor post

Roof anchor post to be installed to a hallow-core slab by casting. Suitable for personal fall protection for four simultaneous users and for supporting suspended scaffolding.

Height 800 - 2000 mm

PITO™ wooden roof anchor post

Roof anchor post to be installed to a wooden roof with an anchor rod and a counter plate. Suitable for personal fall protection for four simultaneous users and for supporting suspended scaffolding.

Height 200 - 400 mm

PITO™ metal roof anchor post

Roof anchor post to be installed to a metal roof with a bolt and counter plate. Suitable for personal fall protection for four simultaneous users and for supporting suspended scaffolding.

Structural thickness 300, 400 or 500 mm

PITO™ Variant Uni roof anchor point

Roof anchor point to be installed to the OBS board, plywood or boarding of wooden roof. Suitable for personal fall protection for four simultaneous users.

Height 300, 500 or 700 mm

PITO™ Variant K roof anchor point

Roof anchor point to be attached to a load-bearing trapezoidal sheet. Suitable for personal fall protection for four simultaneous users.

Height 500, 700 or 1000 mm

PITO™ Stonekit counterweight anchor point

Counterweight anchor point to be installed on a finished roof (slope up to 5°). Suitable for personal fall protection for two simultaneous users.

PITO™ Clip 1 anchor point

Anchor point for installation on a double standing seam roof. Suitable for personal fall protection for two simultaneous users.

PITO™ Clip 2 anchor point

Anchor point for installation on a double standing seam roof. Suitable for personal fall protection for four simultaneous users.

PITO™ Loop wall anchor point, L-bracket

Anchor point for installation on a facade (concrete) with concrete screws. Suitable for personal fall protection for four simultaneous users.

PITO™ Loop wall anchor point, anchor rod

Anchor point for installation on a facade (concrete, steel frame, wooden frame) by injection or through bolting. Suitable for personal fall protection for four simultaneous users.

Length 500 mm

Can all PITO™ roof anchor posts and anchor points be used to support suspended scaffolding?

Not all. The PITO™ roof anchor post, cast-in anchor post and wooden roof anchor post meet the requirements of the suspended access equipment standard SFS-EN 1808, i.e. they can be used to support suspended scaffolding. Other PITO^TMroof anchor points are suitable for use in personal fall protection.

Are PITO™ roof anchor posts also suitable for steep roofs?

Yes, PITO™ roof anchor posts can also be installed on steep roofs, for example, as an anchor point in the vicinity of a house ladder. In addition to the roof anchor posts installed in the roof structure, our range includes, for example, anchor points suitable for double standing seam roof. All our roof anchor post and point models can be installed with the PITO™ Greenline lifeline system.

Can PITO™ roof anchor posts be installed on structures other than roofs?

Yes, PITO™ roof anchor posts and anchor points can be installed on other load-bearing structures such as walls or facades. For example, fall protection for industrial plants can also be implemented with PITO™ roof safety products.

Do you have a roof anchor post that can be attached to the surface layer of the roof?

PITO™ roof safety products are always attached to a load-bearing structure. We want to be sure that the fastening and strength of our products will meet our safety requirements even after years and decades.

In addition to the roof anchor posts installed in the load-bearing structure of the roof, our range also includes roof anchor points with a lighter fastening solution, which are suitable for installation in, for example, plywood or boarding, the counterweight anchor point is suitable for installation on a finished roof.

How many roof anchor posts do I need for the roof?

According to the regulation, all properties requiring maintenance, inspections or upkeep must have safe and easy uninterrupted access. A viable solution for the implementation of fall protection is to place the roof anchor posts to rotate the roof according to the eaves, or on a narrow rectangular roof, the anchor posts can be placed in a row in the middle of the roof.

As part of the lifeline system, the distance between the PITO™ roof anchor posts must not exceed 15 m, recommended 10-12 m, as individual anchor points 7.5 m. This allows you to calculate the number of roof anchor posts required. Remember to place roof anchor posts on all roof levels.

How far from the roof eaves should the roof anchor post be placed?

(On flat roofs) the recommended distance of the PITO™ roof anchor post to the free edge is at least 2.5 m, so that the area of risk of falling remains as small as possible. Check the product-specific recommendations from our technical support before installing the products.